Burglar Alarm

  

Burglar Alarm system for a house

Security Alarm Kit

A.D. Alarms installing Security Alarms since 1984 to domestic and commercial premises. 

A Burglar Alarm System is usually installed to a household in one day with very little disturbance or wiring showing,  if any ! 

Specifications for the average Intruder Alarm for a domestic installation. 

One  118 dB Siren Box often referred to as a  (SAB) Self Acting Bell, because it has its own battery backup so it  cannot be stopped by a burglar from inside the premises. 

Control Pad

The  Control Panel also has its own battery backup in case of mains electric failure. Usually the main panel is fitted out of sight in a cupboard etc with the control pad being placed close to the door of entry so the Security Alarm can be disarmed by the owner quickly and easily. 

Passive Infrared Detectors are fitted usually to all the downstairs rooms and often also to the upstairs landing so that any intruder would trigger the Security Alarm immediately. 

Magnetic door contacts are fitted to the external doors. 

A built-in 24-hour Panic Attack Button which can set the Security Alarm off instantly day or night. 

AD Alarms fit an hundred and 118 dB internal sound bomb to the rear of the property also, because the external Siren Box is usually fitted  high up on the  front elevation of the property where it is very visible, but burglars usually try to break into the rear of the property where they are less visible. So by having this rear sound it will leave them with no mistake that the Security Alarm is in operation. 

A Security Alarm  is extremely easy to use with the main control panel being pre-programmed by our engineer, so it can be set to a number of different configurations by the pressing of only two buttons. 

Example

Arm 1 Full set with all detectors working.

Arm 2  Part set with all detectors working with the exception of the top landing passive infrared for bedtime.

Arm 3 Part set which could be a garage armed ,leaving the house completely switched off. 

The full Burglar Alarm is installed on average for a price of £300 fully inclusive of tax and  would consist of the following equipment.  

Control  Panel

  • 8 Codes
  • 100 Event Memory
  • 6 Communicator Outputs

One  Sterling LCD Keypad 

  • 32 Character LCD Display
  • Adjustable Backlight
  • Dedicated PA and Fire Keys
  • Programmable User names / zone names

3   Passive Infrared Detectors with Advanced Temperature Compensation 

One  8 Zone  Fully Programmable Zones

  • 5 -12m detection Range

One   External Self Acting Siren Box with Battery Backup  

  • Twin Piezo sounder with 118dBa
  • Panoramic strobe effect illuminating the full bell box

Plus  

  • 1 x 12v 2.1 A/h Battery
  • 1 x 100m 6 core cable
  • 1 x Fused Spur
  • 1 x Back box
  • 2 magnetic contacts 

We also sell do-it-yourself Security Alarm Kits and if you would like a quote  please contact us for friendly free advice.

A speech dialler can be fitted to your alarm system and on activation it will ring up to nine telephone numbers repeatedly until it is acknowledged. A common message is played (recorded by customer) telling address details Auto Dialler

Auto Dialler

Following on to second message informing of alarm activation.
It can also be used in conjunction with smoke detectors wired to your security alarm on a fire zone, so on smoke activation alarm set off with a different sound indicating fire and your digital dialler rings out (if nobody is in) to inform with message warning of fire this time.
A third option is also available, say wired to a panic button by your bedside this time informing of illness. 

CCTV - Wired Burglar Alarm - Wireless Burglar Alarm - Auto Dialler

Advertise your business in the Key Fob which also has a splitter built-in for the Key RIng