Wireless Auto Dialler

GSM Gateway instantly GSM Gateway instantly converts a standard security alarm autodialler which uses the telephone landline to ring out into a wireless autodialler using the mobile network.

This provides the highest degree of security at virtually no running costs.

For Installation Price including Auto Dialler go to Wireless Alarms

We Install, Service and Repair Wired Alarms, Wireless Alarms and CCTV just contact us for friendly advice on telephone number (01274) 614650 Mobile 07813 779273 E-mail sales@adalarms.co.uk

AD Alarms based in Bradford and Leeds, install, Service and Repair Wired Alarms, Wireless Alarms and CCTV. Just contact us for friendly advice on telephone number BFD (01274) 614650.

We will travel up to 100 miles to install from Leeds and Bradford but beyond 20 miles of Leeds, there will be a small additional cost for fuel and time.

With a standard autodialler if the burglar cuts the telephone line from outside the building this stops the autodialler from being able to phone out the warning.

There are services that offer to monitor the building’s telephone line and can detect if it has been tampered with but they all charge expensive premiums but with this GSM Gateway connected to a standard autodialler you can protect your premises with the same reliability but without the ongoing costs.

If your security alarm already as an auto dialler which uses the landline to ring out and you want to improve the security of using the mobile network this device will do the job perfectly.

If a full security alarm is not desired for the building this can still protect you by having a basic alarm system installed e.g. maybe just a control panel and a centrally placed passive infrared detector so that if an intruder gets in the alarm panel will silently trigger the auto dialler and GSM Gateway system and send out the warning once again.

Your building could have a mobile telephone service immediately where ever its location is using the GSM Gateway.

Now it is possible to connect your building to the GSM network wherever its location as it doesn’t need traditional landline connections.

The GSM Gateway uses a SIM card; it can function as a mobile phone device. Standard analogue telephones /VoIP/ PBX /  FXO
equipment, etc.) Once they have been connected to this GSM gateway are transformed into mobile devices not needing the landline.

This GSM Gateway with LCD display for caller ID, call time, and many more displays.  Also comes with an inbuilt rechargeable battery for uninterrupted power supply and to prevent power fluctuation problems. With an optimized circuit directly connecting the exchange device for extensions, it is compatible with most telephones, PBX and VoIP gateways (for call  termination), strong signals with a high gain antenna

GSM Gateway.

It is also designed to work with most burglar alarms. All you need is a SIM card. It is simple to use, installation is straight-forward – just plug and go, and more important compatible with most burglar alarms.

SIM card supported (3V, 5V). Caller ID display on the digital screen. It provides a reverse polarity signal for metering, no noise, and a clear voice, suitable for a wide voltage range. Low power consumption, suitable for all kinds of weather and environment. It has 2 RJ-11 ports (two extensions: line / phone and line (optional), locking PIN / network.

Main function &Features

1) GSM fit with LCD display and back up (Li-ion) battery.
2) Steady module and reliable design ensures good performance
3) Provides optimized circuit directly  connecting the exchange device for  extensions
4) Compatible to most telephones, PBX  devices;

5) Connect to Alarm systems to release  wireless
alarm(for security use);
6) Strong signals with a high gain antenna
7) Attractive plastic casing
8) SIM card supported (1.8V, 3V)
9) DTMF CLIP (Caller ID display)
10) Provides reversal polarity signal for billing.
11) No noise and a clear voice.
12) Suitable for wide voltage range and low
power consumption
12) Suitable for all kinds of weather and  environment
13) RJ-11 ports (two extensions)
14) Locking PIN /Locking Phone.

Specifications:
1) Air interface standard: GSM  900/1800Mhz phase 2+
2) Frequency ranges: check the manual.
3) Channel space:  200kHz
4) User line, bell signal: in  line with GB/T15279
5) Max power: 0.25W  / 0.5W
6) Consumption:
a) Immobility:  less than 25mAh
b) Transmission: less  than 400mAh
7) Sensitivity: -105dB
8) Dial tone frequency: 450MHz (standard)
9) Surrounding temperature: -10? ~ +40?
10) Relative humidity: 45% ~ 90% (without  frost)
11) Atmosphere pressure: 86 ~  106KPa
12) Environment noise: <60dB
13) Antenna amplifying: 3.5dB (omni directional), 12dB (certain direction /
chosen direction)
14) AC power: DC 10V –  20V
15) Input: AC100 – 230V, 50 / 60Hz
16) Output: 12V 1.5A
17) Switching type /  transformer type AC adapter (optional)
18) Connector of power: China/US/European/British(optional)
19) Dimensions (L x W x H) (average): 185 x  135 x 22mm
20) Weight:
a) FWT: 400g
b) Full set with AC adapter, antenna, and  box: 0.80kg
21) Color: White
22)  Connection mode: RJ-11 phone sockets
23)  Antenna connection: SMA antenna connection

Answering  Attendant Software Complete voicemail, call attendant, and IVR solution for  Windows.

This software is a  complete voicemail, call attendant, info-line, audio text, interactive voice response, and autodial solution for small to medium businesses.  This software can connect to single or multiple telephone lines with a  professional telephone board voice modem or directly to a VoIP service and all in a Windows environment. No need for complex programming to be able to install and use this software.

It can play recorded messages to callers, redirect incoming calls during office hours or act as an answering machine, and take messages for a number of voice mailboxes.  All calls are logged with date, time, and caller ID.  Recorded messages can be played at any time, forwarded to an email address, or accessed remotely on the internet.

Just run the install file on your PC and it will be ready to answer calls. When you are ready,  you can explore the advanced key response and programming options to create a sophisticated telephone interactive response system.


AD Alarms Wirless Alarms
Also why don’t you follow AD Alarms on our Facebook, Twitter and Google plus pages.

Follow Us


Bradford Wireless AlarmsLeeds Wireless AlarmsShipley Wireless AlarmsIlkley Wireless AlarmsOtley Wireless Alarms Brighouse Wireless AlarmsBatley Wireless AlarmsCastleford Wireless AlarmsYeadon Wireless AlarmsKnaresborough Wireless AlarmsYork Wireless AlarmsIlkley Wireless AlarmsHarrowgate Wireless Alarms Pateley Bridge Wireless AlarmsDewsbury Wireless Alarms Pickering Wireless AlarmsManchester Wireless AlarmsWhitby Wireless Alarms Scarborough Wireless AlarmsWetherby Wireless AlarmsWest Yorkshire Wireless Alarms Yorkshire Wireless Alarms

Leave a Reply